潛水電泵在日常使用中，穩定運行是非常重要的，但是在實際使用的時候，也不可避免的會出現一些問題，當然不用擔心，往往都是一些小問題，隻要能夠及時處理就行。今天，水泵生產廠家就來給大家簡單說說潛水電泵在運行過程中的常見問題以及一些解決方法。

　　1、潛水電泵在運行中，一定要注意觀察出水量是否正常，包括耗油、耗電量是否適當、填料鬆緊是否合適等，如果這些出現問題，都會影響到潛水電泵的穩定運行。

　　2、高速電機在運行中出現了過熱的現象，如果用手摸下電機端蓋，短時間感覺太燙，需要停止運行，進行冷卻，更換另一台設備運行。

　　3、運行中如果潛水電泵突然停機並且電機有“嗡嗡”聲。這可能是電源缺相或者是主回路沒有完全斷開，應立即拉閘，否則會燒毀電機和設備，然後再仔細查找原因並排除。

　　4、潛水電泵運行時，還要經常注意井中水位的變化情況，定期測量靜、動水位，現在儀器儀表的應用對潛水泵的運行情況也能夠很好的了解，可以隨時觀察。

　　以上就是潛水電泵在運行過程中的常見問題及排除方法，希望能夠給廣大用戶提供一定的幫助。

In daily use, it is very important to operate the submersible pump stably, but in actual use, there will inevitably be some problems. Of course, there are often some small problems, as long as they can be dealt with in time. Today, the pump manufacturer will give you a brief introduction of the common problems in the operation of the submersible pump and some solutions.

1. During the operation of the submersible pump, it is necessary to observe whether the water output is normal, including oil consumption, power consumption and packing tightness. If these problems occur, they will affect the stable operation of the submersible pump.

2. The high-speed motor overheats during operation. If you touch the end cover of the motor by hand, it feels too hot for a short time. You need to stop the operation, cool it, and replace another device for operation.

3. During operation, if the submersible pump stops suddenly and the motor has a "buzzing" sound. It may be that the power supply is lack of phase or the main circuit is not completely disconnected, the switch should be pulled immediately, otherwise the motor and equipment will be burned, and then the cause should be carefully found out and eliminated.

4. During the operation of the submersible pump, it is necessary to pay attention to the change of the water level in the well and measure the static and dynamic water level regularly. Now the application of instruments and meters can also have a good understanding of the operation of the submersible pump and can be observed at any time.

The above are the common problems and troubleshooting methods in the operation of the submersible pump, hoping to provide some help to the majority of users.